Gooseneck Trailer Hitch Installation - 2004 Dodge Ram Pickup- Video
Today, on our 2004 Dodge Ram pickup 2500 Series QuadCab, we're going to be installing a B&W turn over ball under-bed Gooseneck trailer hitch, part number BWGNRK1313. This can also be used with a B&W Gooseneck to 5th-wheel adapter, part number BWRVK3500. Next, lets go over the operation of our B&W Gooseneck hitch. Now, we'll go ahead and pull the handle out and put it in the locked position so it's locked open. We can then install the Gooseneck ball into the receiver head. Put the ball into position. We can release the handle, locking the ball in place. Now, when we're not using the Gooseneck ball, we can go ahead and pull the handle out. more
9/11/2014 12:58:48 PM
B and W 5th Wheel Trailer Hitch Installation - 2005 Dodge Ram Pickup- Video
Today on our 2005 Dodge Ram pickup, we'll be installing the B&W Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches, part number BWGNRK1313-5W. The B&W Companion Gooseneck to 5th Wheel Trailer Hitch Adapter, part number BWRVK3500, is designed to be used with B&W Custom Underbed Installation Kits for Companion 5th Wheel Trailer Hitches. Now before we begin our install, we'll go over the operation of the hitch. To unlatch the pin simply pull here on the driver side wheel well and rotate it forward. This will lock the pin in the open position which will allow you to either insert the ball or flip it over for the storage position. Once you have the ball in place, you'll simply take the handle and release it back all the way in. This will lock the ball in place. Now we can show you how the safety chain loops work. more
7/10/2014 3:47:11 AM
B&W Companion 5th Wheel Trailer Hitch Installation - 2011 Dodge Ram Pickup- Video
All right, today in this 2011 Dodge Ram pickup, 3500 series Crew Cab, we're going to install part number BWRVK3500. We want to make sure we remove the goose neck ball. Now at this point, we can go ahead and start working with our 5th wheel companion hitch. We're going to start off with our hitch partially assembled already. So we just need an extra set of hands to help hold it and put it in the bed of the truck then we'll go ahead and put it into our hitch. When initially in place, we want to make sure that our pads are in a trough of the bed itself. We'll go ahead and tighten down the hardware to secure our pads. Now we're lucky our bolts actually got in a little bit of a bind, so we can just tighten them down from the top. If necessary, you can use a Phillips screwdriver underneath to tighten it into place. Next we'll go ahead and install our pin from underneath. I make sure the pin goes all the way through the hitch and also the 5th wheel companion hitch as well. Now during your assembly of the 5th wheel, these four bolts on each side should be still loose. more
5/20/2014 10:57:26 AM
Filter Videos
Filter Videos
